bolts › close tolerance bolts
AN177H15
Aeronautical Standard Bolt
Description
Fastener Length: 1-3/4", Hole Diameter: 1/16", Thread: 3/8-20, Thread Length: 45/64"
Specifications
| Distance From Head Largest Bearing Surface To Shank Hole Center | 1.546 inches nominal first hole |
|---|---|
| Fastener Length | 1.703 inches minimum and 1.750 inches maximum |
| Grip Diameter | 0.4362 inches minimum and 0.4367 inches maximum |
| Grip Length | 1.046 inches minimum and 1.078 inches maximum |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Height | 0.234 inches minimum and 0.266 inches maximum |
| Head Style | Hexagon Head |
| Hole Configuration Style | Hexagon flats |
| Hole Diameter | 0.070 |
| Hole Quantity | 1 |
| Hole Type | Drilled |
| Length | 1 3/4 |
| Material | Steel |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.106 inches nominal first hole |
| Surface Finish | 63.0 microinches bearing surface of head, 63.0 microinches grip |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 ty 2 cl 3 fed spec all treatment responses |
| Thread Class | 3a |
| Thread Diameter | 0.437 |
| Thread Direction | Right-hand |
| Thread Length | 0.625 inches minimum and 0.704 inches maximum |
| Thread Qty | 20 |
| Thread Qty Per Inch (tpi) | 20 |
| Thread Series Designator | UNF |
| Thread Size | 3/8 |
| Width Between Flats | 0.615 inches minimum and 0.627 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- AN177H15
- AN177H46
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN177H15. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error