bolts › close tolerance bolts
AN175C16A
Aeronautical Standard Bolt
Description
Fastener Length: 1-7/8", Thread: 1/4-24, Thread Length: 37/64"
Specifications
| Fastener Length | 1.828 inches minimum and 1.875 inches maximum |
|---|---|
| Grip Diameter | 0.3112 inches minimum and 0.3117 inches maximum |
| Grip Length | 1.296 inches minimum and 1.328 inches maximum |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Height | 0.172 inches minimum and 0.204 inches maximum |
| Head Style | Hexagon Head |
| Length | 1 7/8 |
| Material | Steel |
| Material Specification | Mil-s-18732 mil spec single material response |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Surface Finish | 63.0 microinches bearing surface of head, 63.0 microinches grip |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416,ty 2,cl 3 fed spec all treatment responses |
| Thread Class | 3a |
| Thread Diameter | 0.312 |
| Thread Direction | Right-hand |
| Thread Length | 0.500 inches minimum and 0.579 inches maximum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNF |
| Thread Size | 1/4 |
| Width Between Flats | 0.490 inches minimum and 0.502 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN175C16A. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error