bolts › close tolerance bolts
AN175-5A
Aeronautical Standard Bolt
Description
Fastener Length: 3/4", Hole Diameter: 1/16", Thread: 1/4-24, Thread Length: 37/64"
Specifications
| Fastener Length | 0.703 inches minimum and 0.750 inches maximum |
|---|---|
| Grip Diameter | 0.3112 inches minimum and 0.3117 inches maximum |
| Grip Length | 0.172 inches minimum and 0.204 inches maximum |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Height | 0.172 inches minimum and 0.204 inches maximum |
| Head Style | Hexagon Head |
| Hole Configuration Style | Hexagon longitudinal hole |
| Hole Diameter | 0.070 |
| Hole Quantity | 1 |
| Hole Type | Drilled |
| Length | 3/4 |
| Material | Steel |
| Material Specification | Mil-s-6049 mil spec 1st material response or mil-s-6050 mil spec 2nd material response or mil-s-6098 mil spec 3rd material response or mil-s-5626 mil spec 4th material response or mil-s-6758 mil spec 5th material response or ams 6300 assn std 6th material response |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Surface Finish | 63.0 microinches bearing surface of head, 63.0 microinches grip |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 ty 2 cl 3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.312 |
| Thread Direction | Right-hand |
| Thread Length | 0.499 inches minimum and 0.578 inches maximum |
| Thread Qty | 24 |
| Thread Qty Per Inch (tpi) | 24 |
| Thread Series Designator | UNF |
| Thread Size | 1/4 |
| Width Between Flats | 0.490 inches minimum and 0.502 inches maximum |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- AN175H5A AN 1/4-24 · 3/4 in · Hexagon Head · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error