bolts › close tolerance bolts
AN174-12
Aeronautical Standard Close Tolerance Bolt
Description
Close Tolerance Bolt
Specifications
| Alternate Part Number | 402-310 |
|---|---|
| Country of Origin | USA |
| Distance From Head Largest Bearing Surface To Shank Hole Center | 1.124 inches nominal first hole |
| Drilling | Drilled Head |
| Fastener Length | 1.265 inches minimum and 1.312 inches maximum |
| Grip | 13/16 in |
| Grip Diameter | 0.2487 inches minimum and 0.2492 inches maximum |
| Grip Length | 0.796 inches minimum and 0.828 inches maximum |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Height | 0.140 inches minimum and 0.172 inches maximum |
| Head Style | Hexagon Head |
| Head Type | Hexagon |
| Hole Configuration Style | Hexagon flats |
| Hole Diameter | 0.046 inches minimum and 0.056 inches maximum |
| Hole Quantity | 1 |
| Hole Type | Drilled |
| Industry Standards/Certification | AN174 |
| Length | 1 5/16, 1 9/32 in |
| Material | Steel |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| NIIN | 00-145-7659, 00-180-1738 |
| NSN | 5306-00-145-7659, 5306-00-180-1738 |
| Shank Unthreaded Hole Diameter | 0.076 inches minimum first hole and 0.086 inches maximum first hole |
| Surface Finish | 63.0 microinches bearing surface of head, 63.0 microinches grip |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Qq-p-416 type 2 class 3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | 0.437 inches minimum and 0.516 inches maximum |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series Designator | UNF |
| Thread Size | 0.2500-28, 1/4 |
| Weight | 0.02 lb |
| Width Between Flats | 0.428 inches minimum and 0.440 inches maximum |
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN174-12. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error