bolts › close tolerance bolts
AN174-10
Aeronautical Standard Close Tolerance Bolt
Description
Close Tolerance Bolt
Specifications
| Country of Origin | USA |
|---|---|
| Distance From Head Largest Bearing Surface To Shank Hole Center | 0.858 inches first hole and 0.890 inches first hole |
| Drilling | Drilled Head |
| Fastener Length | Between 1.015 inches and 1.062 inches |
| Grip | 9/16 in |
| Grip Diameter | Between 0.2487 inches and 0.2492 inches |
| Grip Length | Between 0.546 inches and 0.578 inches |
| Hardness Rating | 26.0 rockwell c and 32.0 rockwell c |
| Head Height | Between 0.140 inches and 0.172 inches |
| Head Style | Hexagon Head |
| Head Type | Hexagon |
| Industry Standards/Certification | AN174 |
| Length | 1 1/32 in |
| Material | Steel |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| NIIN | 00-151-1943 |
| NSN | 5306-00-151-1943 |
| Shank Unthreaded Hole Diameter | 0.076 inches first hole and 0.086 inches first hole |
| Surface Finish | 63.0 microinches bearing surface of head, 63.0 microinches grip |
| Surface Treatment | Cadmium and chromate |
| Surface Treatment Specification | Class 3 federal specification single treatment response type 2 qq-p-416 |
| Thread Class | 3a |
| Thread Diameter | 0.250 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.437 inches and 0.516 inches |
| Thread Qty | 28 |
| Thread Qty Per Inch (tpi) | 28 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 0.2500-28, 1/4 |
| Weight | 0.02 lb |
| Width Between Flats | Between 0.428 inches and 0.440 inches |
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN174-10. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error