bolts › close tolerance bolts
AN173C10A
Aeronautical Standard Close Tolerance Bolt
Description
Close Tolerance Bolt
Specifications
| Country of Origin | USA |
|---|---|
| Drilling | Undrilled Head |
| Fastener Length | Between 1.015 inches and 1.062 inches |
| Grip | 5/8 in |
| Grip Diameter | Between 0.1889 inches and 0.1895 inches |
| Grip Length | Between 0.609 inches and 0.641 inches |
| Hardness Rating | 26.0 rockwell c and 32.0 rockwell c |
| Head Height | Between 0.109 inches and 0.141 inches |
| Head Style | Hexagon Head |
| Head Type | Hexagon |
| Industry Standards/Certification | AN173 |
| Length | 1 in |
| Material | CRES |
| Material Specification | Mil-s-18732 military specification single material response |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| NIIN | 00-616-8866 |
| NSN | 5306-00-616-8866 |
| Surface Finish | 63.0 microinches bearing surface of head, 63.0 microinches grip |
| Surface Treatment | Passivate |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | Between 0.374 inches and 0.453 inches |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series | UNF |
| Thread Series Designator | Unf (fine thread) |
| Thread Size | 10 |
| Weight | 0.01 lb |
| Width Between Flats | Between 0.365 inches and 0.377 inches |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- AN173DD10 AN #10-32 · 0.073 in · Hexagon Head · Aluminum
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error