bolts › close tolerance bolts
AN173-32
Aeronautical Standard Bolt
Description
Fastener Length: 3-5/16", Thread: 10-32, Thread Length: 29/64"
Specifications
| Distance From Head Largest Bearing Surface To Shank Hole Center | 3.125 inches minimum first hole and 3.156 inches maximum first hole |
|---|---|
| Fastener Length | 3.266 inches minimum and 3.312 inches maximum |
| Grip Diameter | 0.1889 inches minimum and 0.1894 inches maximum |
| Grip Length | 2.859 inches minimum and 2.891 inches maximum |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Height | 0.109 inches minimum and 0.141 inches maximum |
| Head Style | Hexagon Head |
| Length | 3 5/16 |
| Material | Steel |
| Material Specification | Mil-s-5626 mil spec 1st material response or mil-s-6049 mil spec 2nd material response or mil-s-6050 mil spec 3rd material response or mil-s-6098 mil spec 4th material response or mil-s-6758 mil spec 5th material response or ams,6300 assn std 6th material response |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Shank Unthreaded Hole Diameter | 0.070 inches minimum first hole and 0.080 inches maximum first hole |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Qq-p-416,type 2,class 3 fed spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.375 inches minimum and 0.453 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10 |
| Width Between Flats | 0.365 inches minimum and 0.377 inches maximum |
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN173-32. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error