pins › straight headed pins
AN121603
Aeronautical Standard Straight Headed Pin
Description
Straight Headed Pin
Specifications
| Chamfer Length | 0.037 inches minimum and 0.057 inches maximum |
|---|---|
| Diameter | 0.122 inches minimum and 0.124 inches maximum |
| Distance From Centerline Of Hole To End Of Pin | 0.081 inches minimum and 0.101 inches maximum |
| Features Provided | Casehardened |
| First Hole Diameter | 0.065 inches minimum and 0.072 inches maximum |
| Hardness Rating | 26.0 rockwell c minimum and 32.0 rockwell c maximum |
| Head Style | Pan no. 2 (r1 not required in item description) |
| Height | 0.037 inches minimum and 0.057 inches maximum |
| Hole Arrangement Style | One end drilled |
| Material | Steel |
| Material Specification | Ams 6322 assn std single material response |
| Pin Chamfer Angle | 10.0 degrees minimum and 20.0 degrees maximum |
| Pin Head Diameter | 0.240 inches minimum and 0.260 inches maximum |
| Style Designator | Straight |
| Surface Finish | 63.0 microinches head bearing surface |
| Surface Treatment | Cadmium |
| Surface Treatment Specification | Ams 2400 assn std single treatment response |
| Under Head Length | 0.459 inches minimum and 0.479 inches maximum |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- AN121603
- AN121652
Cross-reference
No interchangeable or dimensionally similar parts are on record for AN121603. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error