bolts › machine bolts
3M1275E3D8A
Bolt
Description
Fastener Length: 3/4", Hole Diameter: 1/16", Thread: 10-32, Thread Length: 5/16"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.811 |
| Grip Diameter | 0.2021 inches minimum and 0.2028 inches maximum |
| Grip Length | 0.496 |
| Head Diameter | 0.3729 inches minimum and 0.3813 inches maximum |
| Head Style | Flat countersunk |
| Hole Configuration Style | Round |
| Hole Diameter | 0.070 |
| Hole Quantity | 1 |
| Hole Type | Drilled |
| Length | 3/4 |
| Material | Nickel |
| Material Specification | Ams 5662 assn std single material response |
| Min. Tensile Strength (psi) | 125000 pounds per square inch |
| Surface Treatment | Passivate |
| Surface Treatment Specification | Mil-l-87132, type i, class b mil spec single treatment response |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.315 |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNJF |
| Thread Size | 10 |
Other sizes
Parts that share this base number, ordered by size. Always verify the full specification before substituting.
- 3M1275E3D3A
- 3M1275E3D4A
- 3M1275E3D5A
- 3M1275E3D6A
- 3M1275E3D7A
- 3M1275E3D8A
Cross-reference
No interchangeable or dimensionally similar parts are on record for 3M1275E3D8A. Try the cross-reference lookup to search by a different part number.
Catalog data updated 2026-07-05. Report a data error