screws › close tolerance screws
110121T3-5
Screw
Description
Fastener Length: 11/16", Thread: 10-32, Thread Length: 3/8"
Specifications
| Countersink Angle | 99.0 degrees minimum and 101.0 degrees maximum |
|---|---|
| Fastener Length | 0.659 inches minimum and 0.691 inches maximum |
| Grip Diameter | 0.1885 inches minimum and 0.1895 inches maximum |
| Grip Length | 0.302 inches minimum and 0.322 inches maximum |
| Head Diameter | 0.258 inches minimum and 0.305 inches maximum |
| Head Style | Flat countersunk |
| Internal Drive Style | Offset cruciform (torque set) |
| Length | 11/16 |
| Material | Titanium |
| Material Specification | Nas 621,6al-4v assn std 1st material response or ams 4928 assn std 2nd material response |
| Min. Tensile Strength (psi) | 160000 pounds per square inch |
| Surface Finish | 32.0 microinches threads, 63.0 microinches grip |
| Thread Class | 3a |
| Thread Diameter | 0.190 |
| Thread Direction | Right-hand |
| Thread Length | 0.337 inches minimum and 0.389 inches maximum |
| Thread Qty | 32 |
| Thread Qty Per Inch (tpi) | 32 |
| Thread Series Designator | UNF |
| Thread Size | 10 |
Cross-reference
Similar parts
Parts with matching key dimensions — often from a different standards family. Candidates for comparison only; verify the full specification before substituting.
- NAS1581F3R5 NAS #10-32 · 11/16 in · Flat countersunk · Steel
- NAS1581F3T5 NAS #10-32 · 11/16 in · Flat countersunk · Steel
Looking for a specific part? Use the cross-reference lookup.
Catalog data updated 2026-07-05. Report a data error